My Raspberry Pi Server just went to 110V power!
Well not really, but the box does have a 110V cord going into it. I opened up a AdaFruit wall adapter and cut the board loose, removed the USB port. I then soldered a power cord to the board. I soldered a 4 pin wired connector to the board at the USB port. The server has 1/10″ pins in place of the USB ports. I then mounted the boards into an old RadioShack project case using AdaFruit PCB mounts.
So now there are two cords coming out one Ethernet and one 110V power cord. The SD card is accessible through the case. I will get pictures up when I can get them.